Table of Contents
Advertisement
158
2.
Disassemble the cover (1).
3.
Disassemble the arm cover (2).
Fig. 81: Assembling the CCEA sewing light (2)
4.
Drill a hole (Ø 24 mm) corresponding to the grain on the inside
of the arm cover (2).
5.
Assemble the arm cover (2).
Fig. 82: Assembling the CCEA sewing light (3)
④
③
(3) - Sewing light
6.
Tighten the holder (4) on the machine arm using the screw
and the toothed lock washer (CAUTION: Use the M6x30
screw and the split lock washer included in the accessories).
7.
Slide the sewing light (3) onto the holder (4) and tighten it.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
(4) - Holder
Setup
Advertisement
Table of Contents
