Dürkopp Adler D669 Operating Instructions Manual page 116

114
Setting options Sewing foot stroke
Menu item Setting 1
linear Sewing foot stroke
Value range 00 – 09 [mm]
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
2.Value Min. Material
On/Off thickness
Value range 00.0 – 10.0 [mm]
2. Value Min. Material
On thickness
Value range 00.0 – 10.0 [mm]
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Programming
Setting 2
Maximum sewing foot
stroke reached at the
upper material thickness
limit.
Material thickness at
which the increase in
sewing foot stroke
should start.
Material thickness up
to which the increase
in sewing foot stroke
should occur.
Material thickness from
nd
which the 2 sewing
foot stroke should be
used.
Material thickness from
nd
which the 2 sewing
foot stroke should be
used.