Table of Contents
Advertisement
Maintenance
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
The collection tray (2) of the pressure regulator will show
accumulation of a water-oil mixture.
Proper setting
The water-oil mixture must not rise up to the level of the filter
element (1).
Check the level of the water-oil mixture in the collection tray (2).
Fig. 61: Draining the water-oil mixture
①
②
(1) - Filter element
(2) - Collection tray
To drain the water-oil mixture:
1.
Disconnect the machine from the compressed air supply.
2.
Place the vessel under the drain screw (3).
3.
Loosen the drain screw (3) completely.
4.
Allow the water-oil mixture to drain into the vessel.
5.
Tighten the drain screw (3).
6.
Connect the machine to the compressed air supply.
③
(3) - Drain screw
137
Advertisement
Table of Contents
