Table of Contents
Advertisement
162
3.
Screw the junction box (4) under the tabletop, paying attention
to the length of the cables.
4.
Pull the power cable (3) out of the control and insert it into
the junction box (4).
5.
Insert the cable (2) of the junction box (4) into the control.
Fig. 88: Assembling the sewing light with table clamp (3)
⑤
(5) - Power strip
6.
Connect the cable of the power strip (5) to the junction box (4)
as shown in the wiring diagram (Appendix ( p. 203)).
7.
Tighten the cover of the junction box (4) and lay the cables
neatly.
8.
Insert the plug of the sewing light (1) into the power strip (5).
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Setup
Advertisement
Table of Contents
