Finisher Or Stacker Sensor (Bin-Full Receive) Removal - Lexmark X792 Service Manual

7562

Finisher or stacker sensor (bin-full receive) removal

See "Finisher /High-capacity output stacker assembly" on page 7-37
1.
Remove the option from the printer.
2.
Remove the option rear cover. See
3.
Remove the two screws (A) securing the sensor.
4.
Disconnect the cable, and remove the sensor.
4-348
Service Manual
"Finisher or stacker rear cover removal" on page
for the part number.
4-346.
Previous
Next
Go Back