Setting For A Network Module - Mitsubishi Electric MELSEC iQ-R Reference Manual

Setting for a network module

The co-recording setting can be set in the parameter of a network module.
For details on the parameter setting, refer to the manual for a network module used.
Item
Co-recording Setting
*1 A co-recording trigger may not be sent when performing co-recording via networks, because the range is determined by a device in
which a recording trigger is satisfied.
For details, refer to the following:
Page 12 System via a network
*2 Even when setting "Not use" for a network module of the master station, a co-recording trigger from another station is sent to another
station.
5 PARAMETER SETTINGS
24
5.1 Setting for Co-recording
Description
Set whether to send and receive a co-recording trigger between the programmable controller
system on which a module is mounted and other stations in the same network.
Setting range
• Use
*1*2
• Not use