ABB RELION 620 Series Technical Manual page 998

Section 9
Control functions
9.1.8
9.1.9
992
Monitored data
Table 974: CBXCBR Monitored data
Name Type
POSITION Dbpos
Table 975: DCXSWI Monitored data
Name Type
POSITION Dbpos
Table 976: ESXSWI Monitored data
Name Type
POSITION Dbpos
Technical revision history
Table 977: CBXCBR Technical revision history
Technical revision
B
C
D
Table 978: DCXSWI Technical revision history
Technical revision
B
C
Values (Range) Unit
0=intermediate
1=open
2=closed
3=faulty
Values (Range) Unit
0=intermediate
1=open
2=closed
3=faulty
Values (Range) Unit
0=intermediate
1=open
2=closed
3=faulty
Change
Interlocking bypass input (ITL_BYPASS) and
opening enabled (OPEN_ENAD)/closing enabled
(CLOSE_ENAD) outputs added. ITL_BYPASS
bypasses the ENA_OPEN and ENA_CLOSE states.
Internal improvement.
Added inputs TRIP and SYNC_OK. Renamed input
ITL_BYPASS to SYNC_ITL_BYP. Added outputs
CL_REQ and OP_REQ. Outputs OPENPOS and
CLOSEPOS are forced to "FALSE" in case status is
Faulty (11).
Change
Maximum and default values changed to 60 s and
10 s respectively for
value changed to 30 s for
setting.
Outputs OPENPOS and CLOSEPOS are forced to
"FALSE" in case status is Faulty (11).
1MRS757644 F
Description
Apparatus position
indication
Description
Apparatus position
indication
Description
Apparatus position
indication
Event delay settings. Default
Operation timeout
620 series
Technical Manual