5 UTILITY PACKAGE (GX Configurator-TC)
5.4 Initial Settings
5 - 14
[Purpose]
Configure initial settings for operating the Q62HLC in each channel.
For the initial setting parameter types, refer to Section 5.1.
Setting parameters in the Initial setting window can omit parameter settings with
sequence program.
[Operating procedure]
*1
"Start I/O No.
"
*1: Enter the start I/O No. in hexadecimal.
[Setting screen]
Limiter setting
"Module type"
"Module model name"
MELSEC-Q
Initial setting
Alert function setting
Control parameter setting
1)
5 - 14