Mitsubishi Electric MELSEC-Q Series User Manual page 63

3 SPECIFICATIONS
Setting item
CH1 Execution pattern
CH1 Program pattern 1 pattern link
CH1 Program pattern 1 iteration
CH1 Program pattern 2 pattern link
CH1 Program pattern 2 iteration
CH1 Program pattern 3 pattern link
CH1 Program pattern 3 iteration
3 - 28
1) The number of execution times for when patters are linked
The following setting example is used to explain the number of
execution times for when patterns and linked.
Buffer
memory
address
272
321
322
385
386
449
450
According to the program patterns 1 to 3 pattern link, the pattern of
executing the program is in the order of the pattern 1, pattern 2, and
pattern 3. This is one cycle.
The cycle of the pattern 1, pattern 2, and pattern 3 is repeated 10 times to
control the program. (Control is not performed by repeating the pattern 1
10 times, the pattern 2 20 times, and the pattern 3 30 times.)
The value set in CH1 Execution pattern (buffer memory address:
272) is 1 in this setting example; therefore, the pattern 1 is a starting
point. CH1 Program pattern 1 iteration (buffer memory address: 322)
is referred to for the number of execution times. In this case, 10 is the
setting value. (CH1 Program pattern 2 iteration (buffer memory
address: 386) and CH1 Program pattern 3 iteration (buffer memory
address: 450) are ignored.)
Setting value
1
(executed from the pattern 1)
2
(link to the pattern 2)
10
3
(link to the pattern 3)
20
0
(link not performed)
30
MELSEC-Q
Remarks
-
-
This setting value is
referred to.
-
Ignored
-
Ignored
3 - 28