Mitsubishi Electric MELSEC-Q Series User Manual page 29

2 SYSTEM CONFIGURATION
Applicable CPU module
CPU type
Universal model
Programmable
QCPU
controller CPU
Safety CPU
C Controller module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
2 - 2
CPU model
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
QS001CPU
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
*1: Limited within the range of I/O points of the CPU module.
*2: Can be installed to any I/O slot on a base unit.
*3: Extension base units are not connected to the safety CPU module.
REMARKS
For using the Q62HLC with the C Controller module, refer to the C Controller
Module User's Manual.
(b) Mounting to a MELSECNET/H remote I/O station
The following table lists the network modules and base units applicable to
the Q62HLC and quantities for each network module model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
Applicable network
No. of modules
module
Up to 64
*1: Limited within the range of I/O points of the network module.
*2: Can be installed to any I/O slot on a base unit.
REMARKS
The Basic model QCPU or C Controller module cannot create the MELSECNET/H
remote I/O network.
Number of modules *1
Main base unit
Up to 64
Not applicable
Up to 64
*1
Main base unit of
remote I/O station
MELSEC-Q
Base unit *2
Extension base unit
*3
Applicable Not applicable
*2
Base unit
Extension base unit of
remote I/O station
Applicable Not applicable
2 - 2
2