Mitsubishi Electric MELSEC-Q Series User Manual page 261

APPENDICES
Item
A starting method of program
control can be selected from the
following.
0: Zero start
Program control 1: PV start 1 (time fixed)
function 2: PV start 2 (time shortened)
PV start 3 (time shortened/find
type) and SV start are not
available.
SV tracking function None
Forced output
None
function
Parameter change in
program control None
function
Intelligent function
module switch Use prohibited (fixed to 0)
setting (Switch 3)
Appendix - 3
(2) Functions added to products with a serial number (first five digits)
of "13102" or later
Existing model
Description
Model (serial number (first five
digits) of "13102" or later)
A starting method of program
control can be selected from the
following.
0: Zero start
1: PV start 1 (time fixed)
2: PV start 2 (time shortened)
3: PV start 3 (time shortened/find
type)
4: SV start
When control is switched, drastic
change of the set value (SV) is
prevented.
Specified manipulated value (MV)
can be forcibly output regardless
of the control mode.
Buffer memory settings can be
changed and reflected to the
control in execution without
stopping program control.
The forced output function and
the parameter change in program
control function can be enabled or
disabled.
MELSEC-Q
Applicable
software Reference
package
Section
3.2.12
Section
3.2.15
Section
GX Works2
3.2.51
Version
1.73B or Section
later 3.2.16
Section
3.2.52
Section
3.2.53
Section
3.2.18
Section 4.5
Appendix - 3