Checking The Q62Hlc Status By System Monitor Of Gx Developer - Mitsubishi Electric MELSEC-Q Series User Manual

8 TROUBLESHOOTING

8.13 Checking the Q62HLC Status by System Monitor of GX Developer

8 - 9
When the detailed information of the Q62HLC in system monitor of GX Developer is
chose, the error codes and LED lit-up states can be checked.
(1) Operating GX Developer
[Diagnostics] [System monitor]
Module Detailed Information
(2) Module's Detailed Information
(a) Checking the function version
The function version of the Q62HLC is displayed in the product information
field.
051050000000000-C
(b) Checking the error code
The error code stored in buffer memory address 0 of the Q62HLC is
displayed in the latest error code field (refer to Section 8.1).
If the error code is indicated in hexadecimal, the last 1 digit indicates the
error code and the last 2 to 4 digits indicate the error occurrence cause.
The error occurrence cause includes the following information.
• For a write data error: buffer memory address that detected the error
• For an AT error completion or hardware error: factor code
(When the Error History button is pressed, the contents displayed in the
latest error code are displayed in the No. 1 field.)
Select the "Q62HLC"
Function version
Product information (first 5 digits)
MELSEC-Q
8 - 9