Forced Output Function - Mitsubishi Electric MELSEC-Q Series User Manual

3 SPECIFICATIONS

3.2.16 Forced output function

3 - 44
(1) Forced output function
Specified manipulated value (MV) can be forcibly output regardless of the
control mode. Using this function, analog output can be processed forcibly
without being affected by the operation result of the control. This function is
enabled only when the bit 0 of the switch 3 is set to 1 (Enable) in the intelligent
function module switch setting.
(2) Execution of the forced output function
The following is the forced output function procedure.
MELSEC-Q
3 - 44