Mitsubishi Electric MELSEC-Q Series User Manual page 31

2 SYSTEM CONFIGURATION
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q12PRH/
Q25PRHCPU
Q00UJ/Q00U/
Q01UCPU
Q02U/Q03UD/
Q04UDH/
Q06UDHCPU
Q10UDH/
Q20UDHCPU
Q13UDH/
Q26UDHCPU
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Q10UDEH/
Q20UDEHCPU
Q50UDEH/
Q100UDEHCPU
If installed in a MELSECNET/H remote I/O
station
2 - 4
(4) Supported software packages
Relation between the system containing the Q62HLC and software package is
listed in the following table.
GX Developer or GX Works2 is necessary when the Q62HLC is used.
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Version 8.68W or later
Multiple CPU system
Single CPU system
Version 7.10L or later
Multiple CPU system
Redundant CPU
Version 8.45X or later
system
Single CPU system
Version 8.78G or later
Multiple CPU system
Single CPU system
Version 8.48A or later
Multiple CPU system
Single CPU system
Version 8.78G or later
Multiple CPU system
Single CPU system
Version 8.62Q or later
Multiple CPU system
Single CPU system
Version 8.68W or later
Multiple CPU system
Single CPU system
Version 8.76E or later
Multiple CPU system
Single CPU system
Multiple CPU system
*1: GX Configurator-TC does not support functions added to products with a
serial number (first five digits) of "13102" or later. Set those functions using
sequence programs or GX Works2 of version 1.73B or later. For the
functions added to products with a serial number (first five digits) of "13102"
or later, refer to Appendix 2 (2).
GX Developer GX Configurator-TC
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 1.20W or later
Version 1.23Z or later
Cannot be used.
Cannot be used.
Version 6 or later Version 1.20W or later
Software version *1
Refer to the GX
Works2 Version 1
Operating Manual
(Common).
Cannot be used.
Cannot be used.
MELSEC-Q
GX Works2
2 - 4