Intelligent Function Module Switch Setting - Mitsubishi Electric MELSEC-Q Series User Manual

4 PROCEDURES AND SETTINGS BEFORE SYSTEM OPERATION

4.5 Intelligent Function Module Switch Setting

4 - 8
This section explains the intelligent function module switch settings.
Configure intelligent function module switch settings with I/O assignment setting on GX
Developer.
Using intelligent function module switch settings, the Q62HLC output status can be set
when an error stop occurred in the programmable controller CPU.
For setting details, refer to Section 3.2.11.
(1) Setting items
Five switches (switch numbers 1 to 5) are available for the intelligent function
module and they are set with 16 bit data.
If the switches for the intelligent function module are not set, the default value of
0 is used for switches 1 to 5.
Switch 1
*1
Switch 2
Switch 3 *2
Switch 4
Switch 5
*1: The Q62HLC with production information (first five digits) of "10022" or later,
or the serial number (first five digits) of "10011" or later is compatible. (For the
checking method of production information and serial number, refer to
Section 2.3.)
When a Q62HLC incompatible with this setting is used, set 0.
*2: The Q62HLC with serial number (first five digits) of "13102" or later is
compatible. (For the checking method of serial number, refer to Section 2.3.)
When a Q62HLC incompatible with this setting is used, set 0.
Control status when switching to program control
1 : Switch with executing control
Other than 1 : Switch with suspending control
Use prohibited (fixed to 0)
Use prohibited (fixed to 0)
MELSEC-Q
Setting items
Output setting for CPU stop error
0 : CLEAR
Other than 0 : HOLD
4 - 8