Mitsubishi Electric MELSEC-Q Series User Manual page 176

5 UTILITY PACKAGE (GX Configurator-TC)
5 - 17
[Explanation of items]
(1) Command buttons
Make text file
End setup
Cancel
POINT
Initial settings are stored in the intelligent module parameters. After being written to
the CPU module, the initial setting is made effective by either (1) or (2).
(1) Cycle the RUN/STOP switch of the CPU module: STOP
RUN.
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or reset
the CPU module.
When writing the initial setting using a sequence program, the initial settings will be
executed during the STOP
in. So, execute the initial setting by the sequence program again during the STOP
RUN of the CPU module.
Creates a file containing the window data in the text file
format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
RUN of the CPU module and the value will be written
MELSEC-Q
RUN STOP
5 - 17