Entering The Setup Program - GE HygroPro User Manual

Chapter 2: Operation

2.2.2 Entering the Setup Program

To enter the setup program, complete the following steps:
The default operator-level passcode is 2719.
Note:
To enter the Service menu, the factory-level passcode must be
Note:
entered.
Page 22
Using the arrow keys, highlight the
opened lock and press enter.
Select Passcode and press enter.
Enter your passcode using the up and
down keys to change the value of each
passcode digit, and the left and right
keys to move from one digit to the next.
When the passcode is correct, press
enter.
HygroPro User's Manual