Table of Contents
Advertisement
5.6.
By clicking this menu, the available devices can be rescanned on the serial port
and on the Ethernet, as mentioned in the application starting phase. If the Matrix
Controller Software has a live connection to a device on a port, a question window
appears, asking if you really want to disconnect.
5.7.
If the MATRIX SWITCHER has one or more input or output cards installed, that
have properties available for the user/system administrator to change, than the
settings window can be reached by right clicking on the input or output label. The
exact look of the setting windows may depend on the type of the card because the
different cards have different capabilities. The pictures below are about MX-DVI-
HDCP and MX-HDMI input and output cards.
5.7.1. Set HDMI parameters on input
A right click on input port label near the crosspoint field will result in opening the
HDMI setting window if the card is HDMI capable.
Apply changes to
the currently selected port.
input ports.
Info:
After closing this window, the Current Input option will be selected regardless of
which was active at the time of closing. It is to avoid setting All Inputs by mistake.
Find menu
Input and output Settings
Current input: this option means the modified parameters are applied only to
All inputs: this option means that the modified parameters are applied to all
MX32x32DVI-HDCP-Pro and HDMI-Pro
User's Manual v1.0
Page 77/ 109
Advertisement
Table of Contents
