Show Ppp, Or Show Ppp Settings - 3Com 3C421600A Reference Manual

show ppp, or
show ppp settings
Received Packets — Sum of packets received from a lower layer
application over this bundle.
Bytes to Upper Layer — Sum of bytes to be handed up to an upper
layer application over this bundle.
Bytes from Lower Layer — Sum of bytes received from a lower layer
application over this bundle.
Total Bad Headers — Sum of packets with incorrect PPP Header
(address, Control, PID Field).
COUNTERS for PPP LINK
Operational Status — Not Opened or Opened.
Received Packets — Too Long; sum of frames judged too long.
Transmit Frames — Sum of frames received from the PPP application
for transmission over this link.
Bytes from Upper Layer — Sum of bytes handed down from an upper
layer application for this link.
Bytes to Lower Layer — Sum of bytes received from a lower layer
application for this link.
Received Frames — Sum of frames received on this link.
Bytes to Upper Layer — Sum of bytes handed up to an upper layer
application over this link.
Bytes from Lower Layer — Sum of bytes received from a lower layer
application over this link.
Displays global settings for PPP. You can modify DIAL-IN Users
Authentication using the set ppp receive_authentication
command. Modify the system transmit authentication name by using the
set system command. It lists the following:
DIAL-IN Users Authenticate PAP or CHAP — Indicates whether PPP
requires dial-in users to authenticate strictly via PAP, CHAP, ANY,
EAP-MD5; with ANY, NONE, or ENCRYPTED-ANY (CHAP, EAP-MD-5,
MS-CHAP), or RADIUS-EAP-PROXY. Default: None.
System Transmit Authentication Name — Remote account keyword
used by PPP at the data link layer for WAN connections.
Show Commands 207