Show Ppp On Interface <Interface Name> Counters - 3Com 3C421600A Reference Manual

206 C 4: R
HAPTER OUTER
show ppp on
interface <interface
name> counters
C R
OMMAND EFERENCE
SETTINGS for PPP BUNDLE
Local To Remote Protocol
Compression:
Remote To Local Protocol
Compression:
Local To Remote AC Compression:
Remote To Local AC Compression:
SETTINGS for PPP LINK 20 - 8
AUTHENTICATION
Operational Status:
Local To Remote Authenticate
Protocol:
Remote To Local Authenticate
Protocol:
Displays statistics for PPP running on the specified interface when
interface is active. The interface name can be either rm0/eth:1 (the LAN
interface), loopback, internal, or x/slot:y/mod:z (where x is the type of
unit (rm0 for the RAS 1500 unit; pem0 or pem1 for the RAS 1500
Expansion Unit), y is the slot number, and z is the modem number.
Example:
rm0/slot:1/mod:1).
It lists the following:
COUNTERS for PPP BUNDLE
Operational Status — Not opened or Opened.
Number Active Links — Sum of active links using this PPP bundle.
Transmit Packets — Sum of packets transmitted over this bundle.
Bytes from Upper Layer — Sum of bytes received from an upper layer
application for transmission over this bundle. This counter represents
all data handed down to the PPP application BEFORE compression
occurs.
Bytes to Lower Layer — Sum of bytes sent to a lower layer application
for transmission over this bundle. This counter represents all data to
be handed down to the lower layer application AFTER compression
occurs.
20
ENABLED
ENABLED
ENABLED
ENABLED
Opened
CHAPMD5
NONE