Rename Command; Rename File <Input_File> <Output_File; Reset Commands - 3Com 3C421600A Reference Manual

Rename Command

rename file
<input_file>
<output_file>

Reset Commands

administrator having to remove the router from service by manually
disabling the network, modifying its parameters, and re-enabling it. This
command modifies static IP LAN networks only (cannot change interface
and frame values for an internal address). Network and interface names
are limited to 64 ASCII characters. See the add ip network command
for more information.
Copies files within the FLASH file system. The FLASH file system is a flat
file system (no subdirectories). Use the list files command to view
currently existing files.
Parameter Description
<input_file> Name of the original file.
<output_file> New name for the file.
Restores the following RAS 1500 settings to their default configuration.
reset
modem_group <name>
modems <modem name >
Parameter
modem_group
modems
Example:
reset modems rm0/slot:1/mod:[1-4]
Description
Resets the specified modem group following changes to its
configuration. This "hard" reset issues an ATZ! command,
closing any active connections on that port.
Resets the specified modems (interfaces) following changes
to its configuration. This "hard" reset issues an ATZ!
command, closing any active connections on that port. The
command also lets you reset multiple modems.
You can reset multiple modems in one command. The
following is the format of the list:
reset modems <modem 1>,<modem 2>,...
The following is the format of each modem:
x/slot:y/mod:z (where x is the type of unit (rm0 for the RAS
1500 unit; pem0 or pem1 for the RAS 1500 Expansion
Unit), y is the slot number, and z is the modem number.
Example: rm0/slot:1/mod:1).
Rename Command 121