Enable Dns Host_Rotation; Enable Icmp Router_Advertise; Enable Interface <Interface_Name - 3Com 3C421600A Reference Manual

90 C 4: R
HAPTER OUTER
enable dns
host_rotation
enable dns
host_rotation
enable icmp
router_advertise
enable interface
<interface_name>
C R
OMMAND EFERENCE
Enables the RAS 1500 process of randomly choosing a primary IP address
and up to eight alternates from the DNS cache. Use the show dns
command to view the current setting.
Enables the RAS 1500 process of randomly choosing a primary IP address
and up to eight alternates from the DNS cache. Use the show dns
command to view the current setting.
Enables the RAS 1500-generated router advertisements multicast on the
same LAN segment as the RAS 1500. Use the show icmp settings
command to view the current setting.
Enables the specified interface. Enabling an interface allows it to transmit
and receive data.Use the list interfaces command to see the
currently defined interfaces and their status.
You can enable multiple interfaces in one command. The following is the
format of the list:
enable interface <interface 1>,<interface 2>,...
The following is the format of each interface:
x/slot:y/mod:z
where x is the type of unit (rm0 for the RAS 1500 unit, pem0 or pem1 for
the RAS 1500 Expansion Unit), y is the slot number, and z is the modem
number.
Example:
rm0/slot:1/mod:1,pem0/slot:1/mod:2
Enter interfaces from the same slot in ranges.
Example:
rm0/slot:1/mod:[1-4],pem0/slot:1/mod:[1-4]
Example:
enable interface rm0/slot:1/mod:[1-4],pem0/slot:1/mod:1