Show Filter <Filter_Name; Show Icmp Or Show Icmp Settings - 3Com 3C421600A Reference Manual

show filter
<filter_name>
show icmp or
show icmp settings
For example (easyfilter.fil):
RULES FOR FILTER /./easyfilter.fil SHOW PROTOCOLS: ALL
#filter
IP:
10 reject src-address = 234.149. 82.139;
20 accept src-address != 234.149. 82.139;
30 reject udp-src-port = 69;
40 reject tcp-src-port = 23;
50 reject udp-dst-port = 69
60 reject tcp-dst-port = 23;
IP-RIP
10 accept network = 244.49. 82.0;
20 deny
protocol [atalk, atalk-arap, atalk-call, atalk-rtmp,
atalk-zip, br-eth, br-eth-call, ip, ip-call,ip-rip, ipx,
ipx-call, ipx-rip, ipx-sap, login-access]
Displays filter rules based on protocol options specified. The filter name
MUST be a filter file (filter.fil), as listed using list filters. Also see
the show filter command above. It lists the following:
ATALK — AppleTalk data filter rules.
IP — IP data filter rules.
IP-CALL — IP call filter rules.
IP-RIP — IP RIP advertisement filter rules.
IPX — IPX data filter rules.
IPX-CALL — IPX call filter rules.
IPX-RIP — IPX RIP advertisement filter rules.
IPX-SAP — IPX SAP advertisement filter rules.
LOGIN-ACCESS — Login access filter rules.
Displays incoming login-access information including whether ICMP
logged and ICMP Router Advertise are enabled. You can turn multicasting
of ICMP router advertisements on or off with the enable or disable
icmp_router_advertise command.
Show Commands 185