Telnet Messages - 3Com 3C421600A Reference Manual

Event Message Examples 261
"The configuration file <filename> is corrupt. Status <error
status>."
Meaning: The Configuration file has been corrupted. It will be renamed
to <filename>.bad
Action: Keep a copy of the <filename>.bad file. If the file was uploaded
to using TFTP, upload the file again making sure the TFTP transfer mode is
set to octet
"Could not create a list for CFM Control Structures. Status: <error
status>."
Meaning: The Configuration File Manager could not allocate the
resources necessary for normal operation
Action: Reboot the system

TELNET Messages

"CIP_GET_SHARED_DEV_REQ failed: no modems available"
Meaning: A user is attempting to TELNET to RAS 1500 to perform
modem sharing, but there are no free modems available for the group
defined
Action: Use the list service command to see which modem group is
configured. Determine why all modems in the modem group are being
used
"User X attempted CLI access without dial-out privileges. \n"
Meaning: A user is attempting to TELNET to RAS 1500 to perform
modem sharing using a valid username and password, but the user
profile does not have dial-out enabled
Action: Use the set user <name> type dial_out command to
enable dial-out privileges for the user