Modem Command Overview - 3Com 3C421600A Reference Manual

A
Modem Command
Overview
M C
ODEM
This appendix includes:

Modem Command Overview

Basic AT Commands
Ampersand Commands
Percent Commands
Asterisk Commands
Tilde Commands
Octothorp Commands
S-Register Commands
Using S-Register Commands
This appendix lists the modem (AT) commands supported by the RAS
1500. To issue these commands through the RAS 1500's CLI, use the set
switched interface router command and its at parameter. For example,
to reset the modem (specifically, modem one, in slot one, in the RAS
1500 unit), type the following command at the CLI prompt:
set switched interface rm0/slot:1/mod:1 at z!
For more information about the set switched interface command, see
Chapter 4, "Router Command Reference."
OMMAND
R
EFERENCE