3Com 3C421600A Reference Manual page 38

38 C 2: A
HAPTER DMINISTRATIVE
T
OOLS
Next, from a machine that has access to the same network, use the
following TFTP commands to transfer the filter file to FLASH memory.
tftp <RAS 1500 IP address>
put <filename>
Use to verify the file was sent to the RAS 1500.
list files
Important: Do not transfer binary files. Transferring binary files of any
type will cause unexpected results and may cause the RAS 1500 to
"hang".
Using Rlogin and Telnet
You can connect to a specific host on the network using the
command. You must first have used the
telnet
commands for the RAS 1500 to recognize an Internet
add dns server
Protocol (IP) host name.
is not supported into the RAS 1500. You can only use
Rlogin
communicate out of the RAS 1500.
and use the following syntax:
Rlogin telnet
rlogin <IP name or address>
login_name <name>
tcp_port <number>
or:
telnet <IP name or address>
For example, to telnet to a host with an IP address of 167.199.76.23, use
the following command:
telnet 167.199.76.23
or
rlogin
or
add dns host
rlogin
to