Disable Ip Address_Pool; Filtering; Disable Ip; Routing - 3Com 3C421600A Reference Manual

86 C 4: R
HAPTER OUTER

disable ip

address_pool_

filtering

disable ip

forwarding

disable ip
network
<network_name>
disable ip
rip
disable ip

routing

disable ip
static_remote_routes
disable ip
udp_broadcast_
forwarding
C R
OMMAND EFERENCE
Example:
rm0/slot:1/mod:[1-4],pem0/slot:1/mod:[1-4]
Example:
disable interface rm0/slot:1/mod:[1-4],pem0/slot:1/mod:1
Disables packet filtering on all Internet Protocol (IP) address pools (drops
packets for IP addresses within IP pools not in use). Use the show ip
settings command to view edits.
Causes the system to stop forwarding any packets over IP networks but
the RAS 1500 still operates as a client. Under most circumstances, you
never disable forwarding. You may want to disable ip forwarding if you
are using the system only as a terminal server since users who Telnet to
the system can still connect to remote hosts. Use the show ip
settings command to view edits.
Disables the specified IP network. Make sure there is no activity on this
network before disabling it.
Disables the RIP routing algorithm on all IP networks. You can use show
ip routing to see the current status of IP routing. This saves system
space by preventing a large RIP database, which is useful for networks
connecting over the WAN interface.
Disables all routing protocols on all IP networks. Currently, the only
routing protocol is RIP, which means that disable ip rip performs
the same function. You can use the show ip routing command to
see the current status of IP routing.
Disables all statically defined remote routes on all IP networks, that you
previously defined using the add ip route command. You can list the
current IP routes using the list ip routes command.
Disables the UDP broadcast forwarding feature stopping the RAS 1500
from forwarding UDP broadcast packets. You can use the enable ip
udp_broadcast_forwarding command to enable the RAS 1500 to
forward packets.