List Modem_Groups; List Network Services - 3Com 3C421600A Reference Manual

110 C 4: R
HAPTER OUTER

list modem_groups

list nat user
<user_name>

list network services

list networks
C R
OMMAND EFERENCE
Displays modem groups that you previously defined using the add
modem_group command and the number of ports in each group. This
command also lists the default modem group, all, for example:
GROUP Number of Interfaces
all 24
dialout 4
wan 4
callback 4
Displays settings of actively mapped NAT users. The command lists the
following:
Address — Active address mappings between the user on the private
network and IP address on the public network.
Port — Active port mappings between the user on the private
network and the IP address on the public network.
Displays all network services you defined using the add network
service command. It lists the following:
Name — Name of service. Choices: telnetd (default), tftpd (default),
bootpd (default), DialOut, SNMP, ClearTCP.
Server Type — Type of network server, for example, TFTPD (TFTP
daemon).
Socket — TCP port number used (you assign or by default) by the
service.
Close — Reveals whether all connections close when you disable this
service: true or false. See add network service command for
details.
Admin Status — Status requested for this service: Enabled or Disabled.
See the add network service command for details.
Displays all defined networks running any protocol. The command lists
the following:
Name — Designation of the network that you defined with the add
network command.
Prot — Protocol of the network: IP, IPX, or Appletalk.