Show Snmp Counters - 3Com 3C421600A Reference Manual

show snmp counters

See the add slip session_start_message command for
information on writing the message.
Example:
SLIP offloading
SLIP Session Start
Message:
Displays many SNMP statistics. It lists the following:
INPUT COUNTERS
Packets — Number of SNMP packets received.
Bad Versions — SNMP messages for an unsupported SNMP version.
Bad Community Names — SNMP messages that used an unknown
SNMP community name.
Bad Community Uses — SNMP messages that represented an SNMP
operation not allowed by the SNMP community named in the
message.
ASN.1 Parse Errors — Sum of ASN.1 or BER errors.
Too Big Errors — SNMP protocol data units (PDUs) for which the value
of the error-status field is `tooBig'.
No Such Name Errors — SNMP PDUs where error-status field is
`noSuchName'.
Bad Value Errors — SNMP PDUs where error-status field is 'badValue'.
Read Only Errors — SNMP PDUs where the error-status field is
`readOnly'.
General Errors — SNMP PDUs where the error-status field is 'genErr'.
Total Request MIB Objects — Sum of MIB objects retrieved successfully
as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
Total Set MIB Objects — Sum of MIB objects altered successfully as the
result of receiving valid SNMP Set-Request PDUs.
Get Request PDUs — Sum of SNMP Get-Request PDUs accepted and
processed.
Get Next Request PDUs — Sum of SNMP Get-Next PDUs accepted and
processed.
Show Commands
Enabled
SLIP connection starting. Your ss
%client_ip \n
209