List Bridge Access_Mac_Address; List Bridge Forwarding - 3Com 3C421600A Reference Manual

list bridge
access_mac_address

list bridge forwarding

Displays the MAC addresses of the systems that have access to the bridge
network. Use add bridge access_mac_address to add addresses
and delete bridge access_mac_address to remove them. The MAC
address access list is not used unless you run the enable bridge
access_mac_addresses command.
Displays the following forwarding and filtering information:
MAC address - A unicast MAC address for which the bridge has
forwarding and/or filtering data.
Status - one of the following:
other - not invalid, learned, self, or mmgt
invalid - aged out
learned - learned and in use
self - statically defined and in use
mgmt - unknown but filtering information exists
RxPkt - Number of packets received from this MAC station.
RxOctets - Number of bytes (octets) received from this MAC station.
Fltr - Number of packets received from this MAC station that were
filtered out (discarded).
Fwd - Number of packets received from this MAC station that were
forwarded.
TxPkt - Number of packets forwarded to this MAC station.
TxOctets - Number of bytes forwarded to this MAC station.
List Commands 99