Show Bridge Or Show Bridge Network <Network Name> Settings; Show Cleartcp Or Show Cleartcp Settings; Show Command Or Show Command Settings - 3Com 3C421600A Reference Manual

show bridge or show
bridge network
<network name>
settings
show clearTCP or
show clearTCP
settings
show command or
show command
settings
Remote No Responses
authentication request (with an error message) on this server.
AUTHENTICATION COUNTER
Local Successful Authentications
Local Failed Authentications
Remote Successful Authentications:
Remote Failed Authentications
Remote No Responses:
Displays information about the specified bridge network. You use add
bridge network to define bridge networks. It lists the following:
Interface Interface this bridge is using.
—
Network address
—
Frame type BRIDGE is the default.
—
Status Enabled or disabled are options.
—
User Name.
Displays the ClearTCP message (Default: Connected) when a ClearTCP
client session is connected to the remote TCP host. It can be modified
using the set clearTCP connect_message command.
Example:
CLEARTCP SETTINGS
ClearTCP Connection Message:
Displays the settings for CLI commands. See set command to modify
settings. Prompts can hold a maximum of 64 ASCII characters. It lists the
following:
History depth - Number of CLI commands issued by the RAS 1500 that
display when the up or down arrow keys are pressed
Global prompt
—
Local prompt Designation of prompt for a temporary CLI session.
—
Console login required
Console idle timeout
Number of times RADIUS failed to answer an
—
Index number for this bridge network.
Whether login to the console is required.
—
Interval before a console session is timed out.
—
Show Commands
5
0
5
0
1
Connected
175