3Com 3C421600A Reference Manual page 137

Parameter Description
<interface_name> The type of module you want to configure: Router unit, PEM,
or PAU for ISDN access.
at_command Configures modem to dial and answer.
call_type Identifies that type of connection from the incoming call. The
possible call types are auto, clear, internet, modemfax, v110,
or v120.
directory Parameter that allows access to set both directory_number1
and directory_number 2, which are provided by the ISDN
access provider.
directory_number1 The primary access number assigned by the ISDN access
provider.
directory_number2 The secondary access number assigned by the ISDN access
provider.
dsx1_line_type Defines Digital System Cross Connect Level 1 line types (T1
and DS1), which permit cross connections by patch cords and
plugs.
nic_config_type2
spid1 Service Profile Identifier: a unique number assigned by the
telephone company to identify the first B channel in BRI ISDN
service.
spid2 Service Profile Identifier: a unique number assigned by the
telephone company to identify the second B channel in BRI
ISDN service.
switch Identifies which of the three switch types is used by the
telephone company. The 3 possible switch types are 1)
AT&T5ESS Custom, 2) National ISDN-1, and 3) NT DMS100
Custom.
tx_line_buildout .
Set Commands 137