3Com 3C421600A Reference Manual page 165

Parameter
<username>
gateway
ip_route
metric
set login user
host_type [prompt | select | specified]
<username>
login_host_ip_address [IP_ name or address]
login_host_name [IP_ name or address]
login_service [rlogin | telnet | cleartcp | ping]
tcp_port [number]
terminal_type [string]
Sets parameters for users whose type is LOGIN.
Parameter
<username>
host_type
login_host_IP_address
login_host_name
login_service
tcp_port
terminal_type
Description
Username specified for the framed network.
IP address of the gateway used to reach this remote network.
IP address of the remote network.
Integer representing how far away the route is, in "hops" from
other routers. Range: 1-15.
Description
User to set parameters for, earlier defined using add user
with login as type. Limit: 32 ASCII characters.
Options are the following:
Prompt — Dial-in user is prompted to enter an IP host
or address.
Select — User is connected to a host, which is chosen
from the list of login hosts you defined using add
login_host. The method of selecting the host is set
using the set connection command (RANDOM or
ROUND ROBIN). Default.
Specified — Dial-in user connects to the login host set
by the login_host_ip_address of this command.
IP address or host name of the remote host.
Designation of host to be resolved at time of connection.
Service used to login to the remote host. Choices:
Rlogin.
Telnet. Default.
ClearTCP.
Ping — User pings a login host, receives a
successful/unsuccessful message and is disconnected.
TCP Port number the remote host expects this login to use.
Limit: 65535.
Terminal type used for the remote connection, for
example, VT100. Limit: 64 ASCII characters.
Set User Commands 165