List Snmp Communities; Set Switched Interface <Interface Name - 3Com 3C421600A Reference Manual

154 C 4: R
HAPTER OUTER
set switched interface
<interface name>
C R
OMMAND EFERENCE
Modifies parameters for an SNMP community (authorized user or host to
which notifications are sent) configured with the add snmp
community command. The community name and IP address of SNMP
requests from managers on the network must match the list, which you
can view using list snmp communities.
Parameter
<community_name>
access
address
access [dial_in | dial_out | two_way]
at_command <string>
clid_security [off | on]
connection_type [direct_conn | direct_net | no_prompt |
normal | prompt_user_only]
dial_prefix <string>
filter_access [off | on]
host_address <IP_name or address>
host_type [prompt | select | specified]
init_script <init_script_name>
input_filter <filter_name>
login_service [cleartcp | rlogin | telnet]
message <string>
output_filter <filter_name>
password <password>
prompt <string>
protocol [arap | ppp | slip]
tcp_port <port>
type [login | login_network | network]
user_name <user_name>
Description
Group designation for a pool of management stations that
authorize SNMP requests.
Determines what type of access to SNMP MIBs the added
user has. Options are Read Only (RO), Read Write (RW), and
Administrator (ADM). Administrator allows read access to all
objects and write access to all writeable objects. RO is the
default on public (0.0.0.0) networks and RW the default on
private networks.
IP address of this SNMP management station, expressed in
the form nnn.nnn.nnn.nnn