Set Dialout User <User_Name - 3Com 3C421600A Reference Manual

162 C 4: R
HAPTER OUTER
set dialout user
<user_name>
C R
OMMAND EFERENCE
type
local_IP_address [IP_network_address]
reply1_script ["string"]
reply2_script ["string"]
reply3_script ["string"]
reply4_script ["string"]
reply5_script ["string"]
reply6_script ["string"]
send1_script ["string"]
send2_script ["string"]
send3_script ["string"]
send4_script ["string"]
send5_script ["string"]
send6_script ["string"]
Sets parameters for dial-out users, both WAN and modem. Send scripts
are useful under the following conditions:
Dial-out sites — User dials out to a remote location and is connected
or prompted for a login.
Dial-in/dial-out — User dials in to the RAS 1500, then dials out to a
remote site and is connected.
Telnet/dial-out — User telnets into the RAS 1500, then dials out to a
remote site and is connected as a shared_modem user.
Script strings are limited to 240 characters that must be enclosed in
double quotes if they exceed 64 ASCII characters.
Type of user added. A user may be one or more types, but
call-back and dial-out are mutually exclusive.
Login users are TCP users who use the login_service
specified.
Network users are framed protocol users, who use the
network_service specified.
Call-back users disconnected after authentication and called
back.
Dial-out users are either modem sharing users or WAN
connection users.
Manage users with system administration authority.