Show Tcp Counters; Show Telnet Or Show Telnet Settings - 3Com 3C421600A Reference Manual

212 C 4: R
HAPTER OUTER

show tcp counters

show telnet or show
telnet settings
C R
OMMAND EFERENCE
TCP SETTINGS
Retransmission Algorithm:
Minimum Timeout:
Maximum Timeout:
Maximum Connections:
Displays system-wide TCP statistics.
TCP COUNTERS
Active Opens — Number of times TCP connections have made a direct
transition to SYN-SENT state from CLOSED state.
Passive Opens — Number of times TCP connections have made a
direct transition to SYN-RCVD state from LISTEN state.
Attempt Fails — Number of times TCP connections have made a direct
transition to the CLOSED state from either the SYN-SENT state or the
SYN-RCVD state, plus the number of times TCP connections have
made a direct transition to the LISTEN state from the SYN-RCVD state.
Resets — Number of times TCP connections have made a direct
transition to the CLOSED state from either the ESTABLISHED state or
the CLOSE-WAIT state.
Currently Established — Number of TCP connections for which the
current state is either ESTABLISHED or CLOSE-WAIT.
Input Segments — Sum of segments received.
Output Segments — Sum of segments sent, including those on
current connections but excluding those containing only retransmitted
octets.
Retransmitted Segments — Sum of segments retransmitted.
Displays the status of the Telnet escape and trying message features
(ENABLED (default) or DISABLED). It is set using disable/enable telnet
escape.
TELNET SETTINGS
TELNET Escape:
Van Jacobson
0
240000
48
ENABLED