List Tftp Clients; List Udp Listeners; List Users - 3Com 3C421600A Reference Manual

list tftp clients

list udp listeners

list users

Displays IP addresses of all users allowed to use the TFTP to connect to the
system. Use the add network service command to add TFTP
support to the system and the add tftp client command to
authorize users to connect.
Example:
TFTP CLIENT addressES
0.0.0.0
157.122.138.134
234.122.156.134
Displays UDP ports being used by the system. These ports correspond to
processes that are receiving UDP data (for example SNMP, User
Management, TFTP service). Local IP addresses and port numbers are
listed for each UDP port.
UDP LISTENERS
Local address Port
0.0.0.000 69
0.0.0.000 123
0.0.0.000 161
0.0.0.000 520
0.0.0.000 1645
0.0.0.000 2049
0.0.0.000 2050
0.0.0.000 3000
Displays all users and attributes you specified using the add and set
user commands. It lists the following:
User Name — User designation you specified using add user
command.
Login Service — Telnet, RLOGIN, or ClearTCP .
Network Service — Type of network service: PPP or SLIP. SLIP service is
not supported for LAN-to-LAN users.
Status — Link status: ACTIVE (in use), INACTIVE (not in use), or
DISABLED (inactivated).
List Commands 115