Add Ipx Route <Ipx_Network; Address; Add Ipx Service <Service_Name - 3Com 3C421600A Reference Manual

66 C 4: R
HAPTER OUTER
add ipx route
<ipx_network_
address>
add ipx service
<service_name>
C R
OMMAND EFERENCE
Parameter
<network_name>

address

interface
enabled
frame
gateway [ipx_host_address]
metric [1-15]
ticks [tick_number]
Adds an IPX static route to the system IPX Route Table, which defines
static routes to remote IPX networks. The command list ipx routes
displays currently defined static routes.
Parameter
<ipx_net_address>
gateway
metric
ticks
address [internal network address]
gateway [network_number.mac_address]
metric [1-15]
node [internal_node_number]
socket [socket_number]
type [service_type]
Adds a static IPX service to the IPX Services Table. You must supply the
name, internal ipx network number, node number, socket, and type of
service for this service. The user must also supply gateway information to
Description
Name of IPX network. Unique ASCII string of up to 64
characters.
Address of the IPX network.
Name of interface with which this IPX network associates. The
default is the first LAN interface (rm0/eth:1).
Optional parameter indicates whether the network is enabled
(YES) or disabled (NO). Default: YES
Frame encapsulation to be used on this IPX network. Choices:
Ethernet_II - contain Type in place of length fields.
Default.
SNAP (Ethernet_SNAP) - Sub-Network Access Protocol
derived from 802.2.
DSAP (802.2) - default frame type for NetWare v4.x.
Novell_8023 (802.3 raw) - default frame type for NetWare
v2.x and v3.x networks.
Description
IPX network address requiring a route.
IPX address of the host that acts as a gateway. The format is
nnnn.xx:xx:xx:xx:xx:xx (network_address.mac_address).
Number of hops through different routers to reach the remote
IPX network. Range: 1-15.
Estimated interval in ticks it takes to deliver a packet to the
remote network. There are approximately 18 ticks per second.
.