List Syslogs; List Tcp Connections - 3Com 3C421600A Reference Manual

114 C 4: R
HAPTER OUTER

list syslogs

list tcp connections

C R
OMMAND EFERENCE
Oper(ating) Status — Current operating state of the interface: Up or
Down. Oper Status is Up only if modem is connected.
Admin(istrative) Status — State of the interface configured by the
administrator: Up or Down.
Displays IP addresses that get SYSLOG entries from the Syslog Table. See
add syslog for more information and delete syslog command to
remove entries. This command shows the following:
Syslog — IP address to which syslog entries are sent.
Log Level — Reporting level of entries to send: (e.g.) UNUSUAL.
M(e)s(sa)g(e) — current number of messages sent since system
bootup.
Count — Number of event messages sent to this SYSLOG sink.
Facility — SYSLOG sink node facility to which the SYSLOG message is
sent. The choices are LOG_AUTH, LOG_LOCAL0, LOG_LOCAL1,
LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4, LOG_LOCAL5,
LOG_LOCAL6, and LOG_LOCAL7.
Compare with list facilities and set facilities commands,
which control what gets output to the Console port. See the following
table.
SYSLOG SINKS
SysLog Log Level
157.132.148.10 UNUSUAL
9
Displays information about all TCP (Telnet, RLOGIN, etc.) connections
including those set by the user. It lists the following:
Local address — IP address of the local host for this connection.
Local Port — TCP port number used by the local connection.
Remote Address — IP address of the remote host for this connection.
Remote Port — TCP port number used by the remote connection.
Status — State of the connection: Closed, Listen, SynSent,
SynReceived, Established, FinWait1, FinWait2, CloseWait, LastAck,
Closing, TimeWait, or DeleteTCB.
Msg Count
214 50
Facility
LOG_AUTH