Show Time Or Show Timezone; Show Udp, Or Show Udp Counters; Show User <Name - 3Com 3C421600A Reference Manual

show time or
show timezone
show udp, or
show udp counters
show user <name>
Displays the system date, time, and uptime. The present time is expressed
in GMT.
Example:
System Date
Timezone Offset from GMT
(hours:minutes):
System UpTime:
Displays statistics for UDP datagrams. It lists the following:
INPUT COUNTERS
Total Input Datagrams — Sum of UDP datagrams received.
Input but No Port — Sum of received UDP datagrams for which there
was no application at the destination port.
Input with other Errors — Sum of received UDP datagrams that could
not be delivered for reasons other than the lack of an application at
the destination port.
OUTPUT COUNTERS
Total Output Datagrams - Sum of UDP datagrams sent.
settings
Displays the parameters defined for the specified user.
Settings - Displays settings for the specified user with the exception of
disabled IP, IPX, Tap Status, and Tunnel Type parameters.
The type of information displayed depends on the type of user you
specify. Issue the list users command to see which users are defined,
and what type(s) user each is. An example of a login/manage follows.
Note that this user may not be typical. Defaults are indicated by (D).
Show Commands
10-JAN-1999 19:25:11
-6:00
1d 00:12:30
213