Set Commands; Set Accounting - 3Com 3C421600A Reference Manual

Set Commands

123
Set Commands
Changes any parameter you specified with an add command, with the
exception of certain accounting and authentication commands that are
not preconfigured by add commands.

set accounting

This field is a KEYWORD. The possible values are the following:
primary_port <port_number>
primary_secret <"secret_string">
primary_server [IP_address or host_name]
retransmissions <number>
secondary_port <port_number>
secondary_secret <"secret string">
secondary_server [IP_address or host_name]
start_time [authentication | connection]
timeout [number_seconds]
use_servers [one | both]
Configures remote (RADIUS) accounting. Use the show accounting
command to check these values.
The IP address/port number pair for accounting and backup servers must
be unique or conflicts occur. For example, one accounting server
designated as both first and second server must have unique port
numbers designated for both servers. However, the same port number
can be designated on servers with different IP addresses.