User_Name; List Ping Systems - 3Com 3C421600A Reference Manual

list pat user
<user_name>

list ping systems

Int — Ethernet interface the network is running on: rm0/eth:1,
loopback, internal, x/slot:y/mod:z (where x is the type of unit (rm0 for
the RAS 1500 unit; pem0 or pem1 for the RAS 1500 Expansion Unit),
y is the slot number, and z is the modem number, for example,
rm0/slot:1/mod:1).
State — Condition of network: ENA (enabled), ENA* (enabling), DIS
(disabled), DIS* (disabling), INIT (initialized), INV (invalid).
Type — STAT (static), DYN (dynamic), or AUTO (default) network.
Network Address — Address of the network.
Displays settings of actively mapped PAT users. The command lists the
following:
Address — Active address mappings between the user on the private
network and IP address on the public network.
Port — Active port mappings between the user on the private
network and the IP address on the public network.
Displays results of ping, including data from the Remote Ping Table. For
more information, see the ping command. The command lists the
following:
Row — Row number within the Remote Ping Table. Default: 20.
Destination — Host name or IP address of the target node being
tested.
Status — Present state of this row. Possible states include the
following:
Complete — Requested number of pings resolved
Active — Ping requests in progress
Bad address — Resolved IP address is illegal
Waiting DNS — Awaiting DNS resolution
Not Active — Specified ping row not active
DNS Failed — Destination address could not be resolved
Alloc Failed — System failed to allocate resources
Count — Number of pings to be transmitted.
Interval — Number of seconds between ping requests. Default: 1
second.
List Commands 111