3Com 3C421600A Reference Manual page 73

.
Ancillary Data
Parameter Description
auth On indicates that login/password authentication should be
performed on incoming connections. Feature not supported
for DialOut service and/or DialOut IP. Format: auth= [on |
off]. Default: on.
drop_on_hangup Value specifying whether the TCP session is dropped after
modem hangs up. Off allows connection to remain active.
Feature not supported for DialOut service. Default: off.
login_banner ASCII string sent to a client when connection is made. It must
be quoted and offset by backslashes if spaces are included in
the string. Specify carriage return after login banner with
login_banner=string\r\n\. Feature not supported for
DialOut service. Format: login_banner=string. Default:
non.
login_prompt ASCII string specifying the login prompt sent during
authentication. It must be quoted and offset by backslashes if
spaces are included in the string. Feature not supported for
DialOut service. Specify carriage return after login banner
with login_banner=string\r\n\.
Format: login_prompt=string. Default: login:
modem_group ASCII string specifying the name of a modem group for whose
modems network service is supplied. This value must be
specified when using DialOut service.
service_type Indicates whether the service offered is modem sharing or
manage.
Modem sharing service connects a client to multiple
modems.
Manage service connects a client to the command line, to
manage the system. Applicable only to Telnet servers; you
cannot use ClearTCP to access the system for
management. Format: service_type=manage, dialout.
Default: manage.
Add network service examples:
To configure a ClearTCP service (not authenticating upon connect) to
offer modem sharing on TCP port 6000 using the first modem in the
second slot in the RAS 1500, enter the following:
add modem_group "hi boston" interface rm0/slot:2/mod:1
add network service modem_sharing server_type cleartcpd
socket 6000 data auth=off,service_type=dialout, modem_group="hi
boston"
Enclose DATA values including spaces with double quotes, for example,
data modem_group="Hi Boston".
Add Commands 73