List Ipx Networks; List Ipx Routes; List Ipx Services - 3Com 3C421600A Reference Manual

108 C 4: R
HAPTER OUTER

list ipx networks

list ipx routes

list ipx services

C R
OMMAND EFERENCE
Displays the IPX networks that you previously defined using the add ipx
network command. It lists the following:
Name — Designation you assigned this network.
Prot — Protocol; always IPX.
Int — Interface on which each IPX network.
State — Enabled or Disabled.
Type — STATIC or DYNAMIC.
Network Address — network address of this IPX network.
Displays IPX routes you previously defined using the add ipx route
command, plus the defined IPX nodes, including any IPX routes learned
via RIP. It lists the following:
Network address — Network address of this route.
Prot(ocol) — Protocol used to find this route. Choices: LOCAL, RIP,
STATIC, NLSP, OTHER.
NextHopNIC — Network address of the next router (the next hop to
the destination), the MAC address for the local IPX nodes (on the
LAN).
Gateway — Address of the gateway to this network.
Metric — Number of hops through routers this network is distant
from.
Ticks — Estimated interval in eighteenths of a second for packet
delivery to the remote network.
Displays IPX pool addresses previously defined with the add ipx
services command. It lists the following:
Name — Name of the IPX service.
NetNum — Network number that the service is on.
Node — Name of the IPX node running the service.
Socket — Socket number of the service.
Type — Service type in hexadecimal format.
Prot — Protocol used to find this service. Choices: SAP, LOCAL, NLSP,
STATIC, OTHER.
Metric — Number of hops through routers to reach this service.