Add Tftp Client <Ip_Name_Or; Address; Add User <User_Name - 3Com 3C421600A Reference Manual

76 C 4: R
HAPTER OUTER
add tftp client
<IP_name_or_
address>
add user
<user_name>
C R
OMMAND EFERENCE
Adds an IP host to the list of IP hosts that receive SYSLOG entries. You can
see the current log levels for the system using list facilities.
You can modify the current loglevel for each facility using set
facility loglevel.
All SYSLOG messages generated by the Auth facility are sent regardless
of loglevel set. To modify this function, disable the allow_all_auth_levels
parameter. All other RAS 1500 facilities are sent only if their loglevels
match the configured syslog loglevel.
Parameter
<ip_name_or_address> Host name or IP address of the UNIX host that receives
facility
loglevel
Adds the tftp client to the Authorization Table for TFTP access.
Parameter
<ip_ name_or_address> Host name or IP address of a host to be added. An
enabled [yes | no]
login_service [cleartcp | ping | rlogin | telnet]
network_service [arap | fcp |frp_1490 | ppp | slip]
password <password>
type [callback, dial_out, login, manage, network,
clid_callback]
Adds a user to the Local User Table. You may specify a type for the user,
as well as login and network protocols, or you may use the defaults. The
list users command displays these parameters for all users. See the
show users command for more information on individual users.
Description
SYSLOG information.
The SYSLOG node facility (site) where SYSLOG messages
are sent. See choices above. Default: log_auth.
There are four levels of logging:
CRITICAL — a serious system error, which may affect
system integrity. Default.
UNUSUAL — an abnormal event, which the system
should be able to recover from.
COMMON — a regularly occurring event.
VERBOSE — a regular periodic event, for example, a
routing update message.
Description
address of 0.0.0.0 allows all clients TFTP access.