Configuring Management Access - 3Com 9100 User Manual

40 C 3: A
HAPTER CCESSING THE
Table 9 Common Commands (continued)
Command
unconfig switch {all}
show banner
Configuring
Management
Access
S
WITCH
The Switch 9100 supports the following two level levels of management:
User
Administrator
A user-level account has viewing access to all manageable parameters,
with the exception of the following:
User account database
SNMP community strings
A user-level account can use the
reachability, and change the password assigned to the account name. If
you have logged on with user capabilities, the command-line prompt
ends with a (>) sign. For example:
3C17705:2>
An administrator-level account can view and change all switch
parameters. It can also add and delete users, and change the password
associated with any account name. The administrator can disconnect a
management session that has been established by way of a Telnet
connection. If this happens, the user logged on by way of the Telnet
connection is notified that the session has been terminated.
If you have logged on with administrator capabilities, the command-line
prompt ends with a (#) sign. For example:
3C17705:18#
The prompt text is taken from the SNMP
that follows the colon indicates the sequential line/command number.
Description
Resets all switch parameters (with the
exception of defined user accounts, and date
and time information) to the factory defaults.
If you specify the keyword all, the user
account information is reset as well.
Displays the user-configured banner.
command to test device
ping
sysname
setting. The number