Table of Contents
Advertisement
The 4-port Gigabit Ethernet Interface Module has
I
four front panel ports each of which connects to a
dedicated, non-blocking redundant Gigabit
Ethernet backplane channel. The module supports
1000BASE-LX and 1000BASE-SX Gigabit Interface
Converter (GBIC) Transceivers
Layer 3
The 12-port 10/100 BASE-TX Fast Ethernet Layer 3
I
Module has twelve 10/100BASE-TX Fast Ethernet
front panel ports that provide a 100 Mbps
connection over UTP-Category 5 cables with
lengths up to 100 meters (328 ft.). These ports
interface to one Gigabit Ethernet non-blocking
port that connects through the backplane to the
switch fabric module.
The 4-port GBIC Ethernet Layer 3 Switching
I
Module has four Gigabit Ethernet Interface
Converter (GBIC) front panel ports, which interface
to four Gigabit Ethernet backplane ports. The
4-port Gigabit Ethernet Layer 3 Switching Module
includes its own embedded management agent
that supports standard Simple Network
Management Protocol (SNMP) Management
Information Bases (MIBs).
Slot Restrictions
Table 5 lists slot restrictions in the Switch 4007R 8-slot
chassis.
Table 5 Switch 4007R 8-slot Chassis Slot Restrictions
Module type
Management modules
Active switch fabric module
Standby switch fabric module
Interface modules
Management Access
You can access and manage your modules using
several methods:
The Administration Console
I
The Web Management suite of applications
I
An external SNMP-based network management
I
application such as 3Com Network Supervisor.
The Administration Console and most of Web
Management are embedded parts of the software
and are available for immediate use to manage your
modules.
Administration Console Access
To manage the module from the Administration
Console:
Log in to the EME.
1
2
At the prompt, enter:
connect <slot>.1
Where
is the chassis slot number of the
<slot>
module that you want to manage, and the number
Slot Restrictions
21
Slot number
9 and 10
7
8
1, 2, 3, 4, 5, 6
Advertisement
Table of Contents
