Electrical Safety
Hazardous voltages are present in the analyzer housings when power is applied to the sys-
tem. Always shut down power source(s) before performing maintenance or troubleshoot-
ing. Only a qualified electrician should make electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair
the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety protection
are void if instrument is operated from an improperly grounded power source..
Sample Gas
viii | 3050-AMS Moisture Analyzer
Verify ground continuity of all equipment before applying power.
Potential hazards of the Sample gas should be taken into consideration before
connecting the Sample gas to the analyzer. Personal protective equipment
and proper ventilation should be used if Sample gas is toxic, flammable, or
corrosive. Check the Sample gas line and all connections for leaks before
powering up. Consult plant safety personnel for appropriate exhaust venting
guidelines for specific Sample gas type.
PN 305804902, Rev A