Crosspoint Menu; Grid View - Lightware MX2-4x4-HDMI20-CA User Manual


  
6. Software Control – Lightware Device Controller
7.4. Crosspoint Menu
7.4.1. Grid View
Grid view is a user-friendly graphical interface displaying the crosspoint state of the matrix router. This is an
easy way to change between the input sources and output sinks.
1
5
6
7
Crosspoint menu of the MX2-24x24-DH-12DPi-R model
#crosspoint #switch #gridview
2 3 4
8 9
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
MX2-HDMI20 series – User's Manual
Device Label
1
Main Menu
2
Navigation Panel
3
Standby Switch
4
Tab Selector
5
Ribbon
Input Ports
6
Connections
7
Output Ports
8
Advanced View
9
The Device Discovery window can be opened by clicking on this ribbon. The
Device Label is displayed which is not the same as the Product Name. The
Product name is displayed in a hint box when the mouse cursor is above the
box. See more information in Status Tab section,
section.
The available menu items are displayed. The active one is highlighted with a
dark grey background color
When the matrix size is too big to display all inputs and outputs, clicking on the
navigation bar scrolls up and down or left and right direction to reach the other
ports.
The device can be switched to Standby Mode or wake up from this mode by the
button. When the matrix is in standby mode the video transmission is disabled
and the LCD is switched off. Remote connections (LAN, RS-232) remain enabled.
Select the desired Grid View, Tile View, or Presets tab.
Each number represents an input port. Click on the port to display the Port
Properties window.
Grey square means the port is available but there is no connection. White square
means there is a connection between the input and the output port.
Each number represents an output port. Click on the port to display the Port
Properties window.
Displaying the Advanced view page, showing the Terminal window and the LW3
protocol tree.
43
and Setting the Device Label