6. Software Control – Lightware Device Controller
7.9.3. RS-232 Tab
The local RS-232 port settings are available on this tab.
7.9.4. Front Panel Tab
Certain settings in connection with the front panel LCD are available in the LDC as well.
LCD brightness: the slider can be set to 0 contrary to the front panel menu. When the value is 0, the LCD
▪
is totally dark.
▪
Lock front panel: the same as the Control lock button on the front panel.
▪
Enable buzzer: enable/disable the built-in beeper.
Find my device: the matrix buzzer beeps shortly three times.
▪
#serial #rs-232 #rs232
RS-232 Tab in the Settings Menu
Front Panel Tab in the Settings Menu
MX2-HDMI20 series – User's Manual
7.9.5. System Tab
The following settings are available on this tab:
▪
▪
▪
ATTENTION! The internal clock is supplied by a button cell when the device is switched off. If the set time
is changed unintentionally or you met any weird behavior in connection with the internal clock, please
contact support@lightware.com.
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
#factory #reset #reboot #restart #date #time
Load factory default settings,
Reboot the device,
Sett the time (internal clock) of the matrix which is used for logging events.
System Tab in the Settings Menu
65